Types of vial for cbd oil

Looking for CBD Oil & CBD Tincture Bottling Options?

Bottles should protect your CBD products and look attractive to customers.

With the CBD oil industry exploding in 2019, the market flooded with entrepreneurs taking advantage of the boom. In 2020, primarily due to COVID-19 disrupting traditional retail outlets, smaller CBD manufacturers have found themselves struggling to survive.

For some CBD manufacturers, there’s light at the end of the tunnel. The purchase of CBD oils and tinctures to treat depression and chronic pain is steadily increasing. Experts say the industry is still on the trajectory to reach the $3.2 billion mark by the end of 2026.

With demand on the incline, now is an opportune time to assess your CBD products and packaging. Ensuring your products stand out from the competition is one way to get your oils and tinctures in the consumer’s hand. How would you say your bottles and labels rate in creating a good first impression? Do they communicate trustworthiness and quality?

If it’s time to up the ante and you want to improve marketability, consider upgrading your branding, bottles, and labels. What bottling options exist? What makes one better than another? This post will address these questions and more.

Glass vs. Plastic

Plastic bottles are less expensive than glass bottles, and for that reason, can seem tempting. They would lower the overall cost (vs. glass), and the savings could be passed on to the consumer. Plus, opaque plastic blocks 100% of the sun’s rays, meaning that your product is completely protected from harmful UV light that can cause premature degradation. The problem with plastic bottles, though, is longevity. CBD oils and tinctures react harshly when in contact with plastic for long periods of time and will break down.

While more expensive than plastic, Glass will not react with CBD oils. Glass is also heavier, which can give you a competitive advantage over those who use plastic. Studies have shown that heavier objects are seen as more valuable and of higher quality. Glass is also non-porous and far better at keeping air from seeping in and damaging your product, even after opening. And since CBD products should be kept cool, glass is the superior choice since it’s better at protecting from excessive heat as well. The target demographic for CBD oil is generally environmentally conscious. Glass is more easily recycled and can be reused commercially in as little as 30 days.

Colored Glass vs. Clear Glass

Beer manufacturers have known for hundreds of years that dark glass bottles protect beer from sunlight better than clear glass bottles. The same goes for CBD oil. The aforementioned UV light is highly damaging to the structure of CBD and hemp-based products. Ideally, you’d choose a bottle that blocks this light. Brown or amber bottles are the most common, but depending on your branding and design, you might want other colors, such as blue or green. Be aware that lighter colored glass is not as effective as darker glass at blocking light. Large wrap around labels will help block more light if you require lighter colored bottles.

Not all ultraviolet light is your enemy. Some UV light can be beneficial! Bottles that allow UVA light but block other wavelengths can help protect against bacteria and other pathogens from contaminating your product and contribute to even longer shelf life.

Clear bottles are generally cheaper than colored bottles but can cause your CBD oils to oxidize and spoil due to UV light exposure. However, if you plan on using shrink sleeve labels to cover your bottles, then clear bottles are certainly an option since the label will do the job of blocking harmful light.

See also  Cbd oil charlotte's web for autism

Droppers vs. Drippers

Droppers are most often preferred when dosing CBD oils and tinctures. The pipettes are usually glass and are attached to a plastic cap and rubber bulb. Some droppers even have measurements printed on the pipettes for greater precision.

If you’ve ever purchased essential oils, they probably came in dripper or “Euro” dropper bottles. The dripper insert allows the product to be dispensed one drop at a time. Since dosing is less precise and more time consuming than with traditional droppers, drippers are far less commonly used for CBD oils and tinctures. One advantage that drippers have is that they allow for end dots on the top of the cap, giving more area for product branding. However, since the dripper inserts are often plastic, repeated contact with CBD oil may reduce shelf life.

Rollerball Bottles

Rollerball bottles are long slender bottles with a stainless steel roller ball at the top protected by a twist cap. Rollerball bottles allow a minuscule amount of oil to distribute evenly as the ball is rolled across the skin. This bottle type provides the easiest way to transport and apply CBD oil blends topically to wrists, feet, back, neck, and pain areas. Like the other bottle option recommendations, dark-colored bottles work best, preferably glass, and wrap-around labels fit the cylinder shape tightly and adhere securely.

Bottle Size and Labeling

The potency of your CBD product may impact the bottle size you choose. If the CBD product’s strength is relatively low, you may want to use a larger bottle since serving and dosing sizes will probably have to increase. Typical bottle sizes are 15ml, 30ml, and 100ml. Also, if the bottles you choose aren’t large enough to properly display the required information, you may need to consider packing your bottles in a secondary level of packaging.

Regardless of the bottle size, your labels should clearly display serving size, ingredients, and proper dosage. The CBD industry is largely under the control of the U.S. Food and Drug Administration (FDA) and the U.S. Department of Agriculture (USDA). Always be sure that you’re compliant with their regulations and communicate to consumers what to expect from your product.

Based on your bottle shape, you’ll need to pick label type and a label application method. You could consider wrap-around labels, top and bottom labels, front and labels, or even shrink sleeve labels, as mentioned earlier. To apply labels, you can use a hand-held labeler, semi-automatic labeler, or fully automatic labeler, depending on your budget, production line needs, and output goals.

Explore Our CBD Bottle Labelers

Once you’ve chosen the right bottles and labels, and you know your CBD product production goals, the next step is selecting the right labeling partner. It’s best to talk to experts before investing in labeling equipment.

Pack Leader USA has a line of label machines that are perfectly suited to help you make quick work of labeling your CBD oil and CBD tincture containers. Our experience and support will ensure your labeler works smoothly for years and years to come.

Explore our labeling solutions today. If you’re not sure which labeler is best for your bottle or line set up, schedule a free consultation with one of our labeling experts.

Concentration Level

One of the variables to take into consideration when evaluating CBD products is potency.

See also  Cbd oil dose for large dog

CBD potency specifically refers to how strong it is. If a CBD extract is rated at 300mg, it’s going to be about half as strong (potent) as the same amount of a CBD extract rated at 600mg CBD. These potencies also rely on the actual size of the bottle! The total CBD listed in mg refers to the dose contained IN THE ENTIRE BOTTLE. If you have a smaller bottle, the potency will increase, so 300 mg in a 15 mL bottle will be twice as potent as a 300 mg oil in a 30 mL bottle.

The majority of CBD companies sell oil tinctures in three different potencies:

• 300 mg
• 600 mg
• 1000 mg

Each of these potencies can come in a 15, 30, 50, or 60mL bottle. These are the most common, but there are also more potent 2000 mg and 4000 mg CBD options available too.

The most important thing to remember when you buy CBD oil is to keep in mind that the bottle size matters. There’s a simple calculation you can make to determine the strength of a CBD oil. It goes like this:


• Anything below 5 mg/mL (10%) is considered low strength
• Anything between 15 and 30 mg/mL (15-30%) is medium strength
• Anything between 30 and 60 (30-60%) is high strength
• Anything else (60+%) is considered ultra-high strength or classified as a concentrate

CBD oil, like most products, can be watered down. Although concentrations of CBD vary across a wide range, quality products will provide between 250mg and 1,000mg per fluid ounce. An effective dosage can range from as little as a few milligrams of CBD oil to a full gram or more, depending on several individual factors and the condition you are interested in treating.

Always start with a small dose, especially if you have little or no experience with cannabis. Less is often more with regard to cannabis therapy; the compounds in CBD oil have biphasic properties, meaning that low and high doses often produce opposite effects. Small doses of CBD oil tend to stimulate; large doses sedate. CBD has no known adverse side effects, but an excessive amount of CBD is likely to be less effective than a moderate dose.
Though there are seemingly endless different CBD manufacturers to choose from, most will offer products in at least two or three different potencies or concentrations. Starting with the lowest potency lets you adequately gauge how much CBD is needed to relieve your specific condition. You can gradually increase the dose to see how that works for you, simultaneously reducing the likelihood of developing a tolerance to the product.

Low-potency CBD oil (300 mg):

Relatively low-potency oil (300 mg) is likely to be a good option for people who may be sensitive to CBD, and some individuals’ endocannabinoid systems are more active than others, so naturally they won’t need as much CBD as others. Many people use a 300 mg oil for things like mild to moderate anxiety, or minor aches & pains. A single serving from a 300 mg (30 mL) bottle is equivalent to 15 drops of oil, which translates to a 7.5 mg dose of CBD. However, plenty of people won’t even use a full dose, as they’re able to achieve relief with as little as 5-7 drops of oil, or about a 3.5 mg dose. CBD has long been recognized as an effective anti-inflammatory with specific properties that reduce the risk of cancer, metabolic disorders, and nerve cell degeneration. Some studies on mice have actually shown CBD to promote the creation of new nerve cells, which could potentially be highly relevant in numerous age-related neurodegenerative diseases. For example, CBD has been proven to block certain specific enzymes known to inhibit marrow-producing tissues, making it an excellent preventative treatment for age-related bone diseases like osteoporosis and arthritis.

See also  Cbd oil for brain disorders

A huge body of research supports the idea that using CBD as a simple, daily supplement provides natural disease-prevention qualities. A low-strength, 300 mg bottle of CBD oil is a good option for a daily supplement; many people take a single daily dose to increase immune health, increase homeostatic balance, and as general disease prevention. CBD oil can be used as a daily treatment to lower the risk of everything from mental disorders and diabetes to obesity and heart disease. Research has shown that the specific antioxidants found in CBD are more powerful than vitamins E and C in terms of physiological function. When used in serums and tinctures, this translates to a wealth of disease-preventing characteristics.

Top CBD researchers and physicians are starting to draw connections between CBD’s influence on brain-to-body communication. For example, Harvard University experimental psychologist and one of the world’s leading CBD researchers, Dr. Bradley E. Alger claims that the core of medicinal cannabinoid treatment lies at the chemical “matrix” between brain and body. According to Alger, CBD likely involves a chemical mechanism that interconnects brain activity and bodily homeostasis: “… the endocannabinoids are literally a bridge between body and mind. By understanding their function, we begin to see a mechanism that could connect brain activity and states of physical health and disease.”

In all honesty, it’s appearing more and more likely that daily small doses (less than 5 mg) of CBD oil may be an extraordinary means of long-term disease prevention. Also, considering the fact that excellent quality, low-concentration oils (300 mg or less) are available for less than $30, it appears that a 100% natural disease-preventing therapy is now a practical means for individuals of all income types – regardless of whether or not they have health insurance.
Preventative medication is likely the key to developing a happier, healthier, and more productive society, and CBD oil very well may be the necessary link that’s been missing for generations on end.

Mid-potency CBD oil (600 mg):

The 600 mg oil is a good “step-up” option for people who find that they’re having to take larger or multiple doses of the 300 mg in order to get effective results. In general, a lot of people use this strength for more moderate cases of anxiety, pain, inflammation, and digestive issues. A single dose is still the same 15 drops of oil, but instead of containing 7.5 mg of CBD, a 600 mg bottle will contain 15 mg per dose.

High-potency CBD oil (1,000 mg):

1,000 mg CBD oil is the highest-strength option. People have used it successfully treat insomnia, depression, anxiety/panic attacks, chronic pain, and/or as a buffer while weaning off drug or alcohol addiction. We do no recommended that first-time users start with this strength tincture.
Just like the 300 and 600 mg products, it comes in a 30 mL bottle, but a single 15 drop serving equates to a heavy 24 mg dose of CBD; unless your condition is fairly severe, you likely won’t need this high-strength tincture.

The main thing to consider when deciding the right strength of CBD oil is to realize that each person’s biochemistry is different. It’s important to start with the smallest possible dose and work up from there.